Chevrolet Cruze - Rear light bulb
Airbags (1)
Alternator (2)
Air conditioning (1)
Car stereo (3)
Battery (4)
Air Vents (1)
Gearbox (1)
Glove box (1)
Control unit (1)
Key (8)
Timing belt (2)
-board computer (4)
Checks and maintenance (26)
Dashboard (1)
Headlight (2)
Tail light (2)
Fog lights (2)
Particulate filter (1)
Air filter (1)
Cabin air filter (4)
Oil filter (1)
Hand brake (2)
Injectors (1)
Side turn signal light bulb (1)
Headlight bulb (10)
Rear light bulb (3)
Interior lights ceiling light bulb (2)
Antifreeze liquid (1)
License plate light (1)
Third brake light (1)
Handle (1)
Engine (1)
Starter motor (2)
Engine oil (3)
Door panel (5)
Front bumper (2)
Rear bumper (3)
Brake pads (2)
Tires (4)
Gear Shift Knob (5)
Pump (1)
Fuel pump (4)
Door (3)
Push button (1)
Instrument cluster (8)
Radiator (4)
Passenger compartment heating radiator (1)
Fuse box (10)
Seat (5)
Coolant temperature sensor (1)
Lock (2)
Outside rearview mirror (5)
Manufacturer's coat of arms (1)
Windscreen wipers (3)
EGR valve (2)
Interior blower (1)
Side window (1)
|
How to reset the oil change light on Kymco Agility 125
If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.
Watch the video!
by ScegliAuto
More videos
|