Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlamp Bulb

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Tail light bulb

To replace the bulbs in the rear headlamp, you need to remove the headlamp itself: open the boot and locate the covers protecting the screws securing the headlamp, positioned along the closure line of the boot. Remove the covers, unscrew the securing screws, and pull the headlamp out of its housing by pulling it backwards. At this point, disconnect the bulb holder and replace any damaged or simply dull bulbs; it is advisable to check the proper functioning of all bulbs before reinstalling the headlamp.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb
Replacing the Front Headlight Bulb
Chevrolet Cruze (2000-2010 / ) Replacing the front headlight bulb is quite simple as there is enough space to manoeuvre once the bonnet is open, and there is no need to remove the …
Replacing Rear Light Bulb
Replacing Rear Light Bulb
Chevrolet Cruze (2000-2010 / ) The rear light consists of two parts, one attached to the bodywork and the other to the boot lid. If you need to replace a bulb located in the part o…
Replacing the Front Light Bulb on a Chevrolet Cruze
Replacing the Front Light Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video tutorial, we will see how to remove and replace the front light bulb on a Chevrolet Cruze. First, open and lift the car's bonnet and lo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos