Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the emblem of the manufacturer of the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Manufacturer emblem

Today's instructions will show us how to disassemble and replace the emblem of the Chevrolet Cruze manufacturer, in simple and quick steps. First of all, let's move to the front part of the car and start disassembling and removing the bumper emblem; to do this, we use a thin and sharp lever, until it is completely detached from the bumper, as shown in the video. At this point, we clean the base of the emblem, making sure that the support is in good condition; we then attach the new manufacturer's emblem, applying the reverse process!

Posted on 13 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the emblem on the Chevrolet Cruze?
How to replace the emblem on the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) This tutorial shows how to replace the emblem on the Chevrolet Cruze, a very simple and quick operation. First, open the bonnet, then unclip all the …
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos