Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Boot Lid of the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car door

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the boot lid of the first series Chevrolet Cruze by following these simple steps. First, open the boot lid and start removing the plastic clips from the trim of the lid itself; then remove the lock cover and disconnect the electrical wiring, as shown in the video.

At this point, use a socket spanner to remove the hinge bolts of the boot lid; then remove it and replace it with the new one, applying the reverse procedure of disassembly!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Chevrolet Cruze
How to Remove the Rear Bumper of the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) The main steps today will show you how to remove and replace the rear bumper of the Chevrolet Cruze. First, open the boot and start unscrewing all th…
How to disassemble the rear lights on the Chevrolet Cruze?
How to disassemble the rear lights on the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial, we can see how to disassemble the rear lights in the Chevrolet Cruze, an extremely simple and quick operation. First of all, make s…
How to Open the Boot on a Chevrolet Cruze
How to Open the Boot on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If the boot of your Chevrolet Cruze won't open, there is likely a fault with the boot release fuse. To resolve this issue, access the fuse box locate…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos