Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : How to replace the spark plugs on the Chevrolet Spark.

Chevrolet Spark - Video tutorial

Model: Chevrolet Spark MK 1, M300 - Years 2009-2016
Part: Spark plugs
Operation: How to replace the spark plugs on the Chevrolet Spark.

Today's guide will show us the steps on how to remove and replace the spark plugs of a Chevrolet Spark engine. First, we open the car's engine hood and begin to disconnect the intake hose from the throttle body and air filter box by unscrewing the metal clamps; then we remove the intake manifold to access the spark plugs, as shown in the video. At this point, we disconnect the connectors and use a socket wrench with an extension to unscrew and remove them; we then install the new ones, screwing them in by hand and gently tightening them with a wrench.


Posted on 24 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Spark 2009-2018 - Where are the Chevrolet Spark spark plugs? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos