Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the spark plugs of the Chevrolet Spark 1.2 16V.

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Spark plugs

This short guide will illustrate the main instructions useful for disassembling and replacing the spark plugs of the Chevrolet Spark 1.2 16V engine. First, open the hood of the car and start by removing the intake duct from the throttle body, then also remove the air filter box (unscrewing the fixing screws); then disconnect the electrical connectors of the spark plug coils, in order to remove them, as shown in the video. At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones (of the correct type and with the same thread pitch).

Posted on 1 December 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
How do you replace the spark plugs on a Chevrolet Spark?
How do you replace the spark plugs on a Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) Replacing the spark plugs on your Chevrolet Spark is a simple job that you can do in a few steps. First of all, turn off the engine and let it cool d…
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In this tutorial, you will see the steps to remove and replace the ignition coil connected to the spark plugs, which allows the current to pass for t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos