Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Spark plugs

See other generations:
Video tutorial

Replacing spark plugs is a maintenance task that is often overlooked and only done when starting issues or idling problems arise. Replace them every 31,000 miles for improved engine performance and fuel efficiency.

The spark plugs are located beneath the intake manifold, so to replace them, you must remove this component by disconnecting it from the air duct and the throttle body. Once you reach the spark plug seats, pull out the leads, blow compressed air to remove any debris that could enter the cylinders, and then remove the spark plugs to install the new ones, applying some copper grease and cleaning the leads' electrodes with contact cleaner spray.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
Replacement of the spark plugs of the Chevrolet Spark 1.2 16V.
Chevrolet Spark (2009-2016 / MK 1, M300) This short guide will illustrate the main instructions useful for disassembling and replacing the spark plugs of the Chevrolet Spark 1.2 16V engine. …
How to Replace the Spark Plugs on the Chevrolet Spark
How to Replace the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Today's guide will show you the steps to remove and replace the engine spark plugs on the Chevrolet Spark. First, open the bonnet and disconnect the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos