Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Chevrolet Silverado Mk3

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

This guide shows how to remove the door panel of the Chevrolet Silverado Mk3. The first step is to remove the trim panels inside the recess of the lock lever and handle, and unscrew the 7 mm bolts. Remove the trim panel of the armrest and take out the 7 mm bolt.

Remove two more bolts from the bottom of the door panel. At this point, detach the side and bottom edges and slide the door panel off from the top. Next, remove the electrical connectors, the lock cable, and the window seal module.

Reinstall the seal supports on the door and install the piece.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exterior Door Handle on a Chevrolet Silverado
How to Replace the Exterior Door Handle on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) Follow these step-by-step instructions to remove and replace the exterior door handle on a Chevrolet Silverado. First, open the front door and start …
How to Replace the Exterior Door Handle on a Chevrolet Silverado MK3
How to Replace the Exterior Door Handle on a Chevrolet Silverado MK3
Chevrolet Silverado (2014-2018 / MK 3) In this video, we will see how to remove and replace the exterior door handle on a third-generation Chevrolet Silverado by following these simple ste…
How to Remove the Door Panel of a Chevrolet Silverado
How to Remove the Door Panel of a Chevrolet Silverado
Chevrolet Silverado (1998-2007 / MK 1) Removing the inner door panel of the right front door of a Chevrolet Silverado is a straightforward task. Use appropriate tools to pry off all the ha…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos