Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlights from the Chevrolet Silverado

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

In this video, you will learn how to replace the front bulbs in the Chevrolet Silverado. Start by opening the hood and remove the plastic cover.

Next, remove the front grille from its position to make the job easier. Once done, proceed to remove the actual headlights; the clips are located inside the hood as well as in the space between the fender and the tire, so you will need to move the cover to access them.

Now that the headlights are removed, you can replace the burnt-out bulbs.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the 2006 Chevrolet Silverado
Where to Find the Fuse Box of the 2006 Chevrolet Silverado
Chevrolet Silverado (1998-2007 / MK 1) Finding the fuses in your first-generation Chevrolet Silverado (2006) is very simple. Just follow the steps in this guide to complete the task in sec…
Where are the fuses located in the Chevrolet Silverado?
Where are the fuses located in the Chevrolet Silverado?
Chevrolet Silverado (1998-2007 / MK 1) In the Chevrolet Silverado, the fuses are located within dedicated fuse boxes in the vehicle. This model has two: the first is inside the cabin, on t…
Where to Find the Fuses of the Chevrolet Silverado 2
Where to Find the Fuses of the Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene safely and effectively in case of f…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos