Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Chevrolet Silverado?

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part: Front bumper

To remove the front bumper on a Chevrolet Silverado, open the hood to access the bolts and remove the fastening rivets at the front of the engine compartment. This will allow you to detach the trim in the center of the bumper by unscrewing all the screws located underneath it. Additionally, unscrew the screws found inside the wheel well: this will enable you to completely detach the bumper after disconnecting the connectors. At this point, you can install the new one.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Chevrolet Silverado?
How to Replace the Front Headlight on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) To replace the front headlight on a Chevrolet Silverado, open the hood to access the rivets securing the front panel of the engine compartment. Next,…
How to replace the front manufacturer emblem of the Chevrolet Silverado
How to replace the front manufacturer emblem of the Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the manufacturer's emblem on the front bumper of the Chevrolet …
How to Replace the License Plate Bulb on a Chevrolet Silverado?
How to Replace the License Plate Bulb on a Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To replace the license plate light bulb on a Chevrolet Silverado, access the inside of the bumper to disconnect the connector attached to the bulb. Y…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos