Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper of the Chevrolet Trax.

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Front bumper

See other generations:
Video tutorial

Below we will see the instructions necessary to disassemble and replace the front bumper of the Chevrolet Trax. First, let's open the car's hood and begin by removing the plastic cover located at the top of the bumper by taking out the plastic clips.

Next, we will unscrew all the screws located under the bumper and on both sides of the front wheel wells, as shown in the video.

At this point, we will unclip the bumper from the sides until it is completely removed, replacing it with the new one. Finally, we will reassemble and secure the bumper to the body, completing the replacement process.


Posted on 6 January 2026 by ScegliAuto


Related tutorials

Where is the fuse box located on the 2019 Chevrolet Trax?
Where is the fuse box located on the 2019 Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) If you do not know where the main fuse box is located on your 2019 Chevrolet Trax, do not worry because the instructions in this guide will help you …
How to Replace the Front Headlamp Bulb on a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) In this new mini guide for your Chevrolet Trax (2013-2022), we will discover the steps to replace the front headlamp bulb yourself. First, park the v…
Where is the OBD2 port of the Chevrolet Trax located?
Where is the OBD2 port of the Chevrolet Trax located?
Chevrolet Trax (2013-2022 / MK 1) Thanks to the steps described in the following guide aimed at all of you who own a first-generation Chevrolet Trax, you will be able to find the OBD2…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos