Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Bulbs in the Chevrolet Silverado Pickup Dome Light

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Interior dome light bulb

See other generations:
Video tutorial

To replace the bed light in the Chevrolet Silverado pickup with LED lights, first remove the rear dome light, which is secured with just two screws. Disconnect the electrical connectors that hold it to the body.

At this point, you can remove the electrical part from the dome light and replace the halogen bulbs with LED ones. Remember to never touch them with bare hands.

Always wear protective gloves. Once you have replaced the bulbs, reinstall the electrical part into the dome light and screw it back to the body with its screws.

The job is complete.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Where is the Parking Light Fuse on a Chevrolet Silverado Pickup?
Where is the Parking Light Fuse on a Chevrolet Silverado Pickup?
Chevrolet Silverado (2007-2014 / MK 2) If the parking lights on your Chevrolet Silverado pickup have suddenly stopped working and the bulbs are intact, you can check the status of the resp…
How to Replace the Headlight Bulbs in a Chevrolet Silverado Pickup?
How to Replace the Headlight Bulbs in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial, you will see how to replace the headlight bulbs in a Chevrolet Silverado pickup, a very simple and quick operation. First, ensure t…
How to Replace the Third Brake Light Bulbs on a Chevrolet Silverado Pickup?
How to Replace the Third Brake Light Bulbs on a Chevrolet Silverado Pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial, you will see how to replace the third brake light bulbs on a Chevrolet Silverado pickup, a very simple and quick operation. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos