Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Chevrolet Impala

Model: Chevrolet Impala MK 9 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

In today’s video, you will see how to replace the air filter in a Chevrolet Impala. First, it is recommended to work only when the engine is cold, so the vehicle should be parked for several hours.

Make sure to have a new air filter before proceeding. Open the hood and start by removing the retaining ring on the air tube, then open the cover of the compartment.

Next, extract the worn air filter and clean the installation area. Once done, insert the new unit, and the operation is complete.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
How to Replace the Cabin Filter on a Chevrolet Impala
How to Replace the Cabin Filter on a Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To replace the cabin filter on a Chevrolet Impala, open the hood to access the components located at the base of the windshield. Remove the two bolts…
How to Replace the Bulbs on the Chevrolet Impala
How to Replace the Bulbs on the Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) To replace the bulb on the Chevrolet Impala, start by opening the hood. Go to the passenger side, remove the vertical plastic cover of the air filter…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos