Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs on the Chevrolet Impala

Model: Chevrolet Impala MK 10 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

To replace the bulb on the Chevrolet Impala, start by opening the hood. Go to the passenger side, remove the vertical plastic cover of the air filter box by releasing the side clips, and take off the rear cover of the headlight.

Take the bulb and turn it slightly counterclockwise to remove it; once the bulb is out, disconnect the connector and pull everything out. Now take the new bulb, reconnect the connector, position it behind the headlight, and turn it slightly clockwise.

Replace the rear cover of the headlight and put back the vertical plastic cover of the air filter box. On the driver’s side, remove the washer fluid hose and replace the bulb using the same procedure as the passenger side, then close the hood.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to replace the rear light and bulbs of the Chevrolet Impala.
How to replace the rear light and bulbs of the Chevrolet Impala.
Chevrolet Impala (2006-2016 / MK 9) Today we will explain how to independently replace the rear light and the bulbs of the rear light on a 2006 Chevrolet Impala. To perform this operati…
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
Replacing the Headlight Bulb of the Chevrolet Impala
Replacing the Headlight Bulb of the Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) Today, we will go through the steps and instructions to remove and replace the low beam bulb of the Chevrolet Impala's headlight. First, open the hoo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos