Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb of the Chevrolet Impala

Model: Chevrolet Impala MK 10 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

Today, we will go through the steps and instructions to remove and replace the low beam bulb of the Chevrolet Impala's headlight. First, open the hood of the vehicle and start by removing the plastic protective cover of the bulbs; then disconnect the electrical connector from the bulb holder, and remove the bulb as shown.

At this point, install the new low beam bulb of the correct type and with the same base; check the light operation and reattach the plastic protective cover.


Posted on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Impala
How to Replace the Headlight Bulb on a Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) To replace the headlight bulb on your Chevrolet Impala (2014-2020) yourself, it only takes a few minutes. With this mini guide, you will complete the…
How to Remove the Front Headlight of the Chevrolet Impala?
How to Remove the Front Headlight of the Chevrolet Impala?
Chevrolet Impala (2006-2016 / MK 9) To replace the front headlight of the Chevrolet Impala, open the hood to access the mounting components of the headlight at the top. Here, you will n…
How to replace the rear light and bulbs of the Chevrolet Impala.
How to replace the rear light and bulbs of the Chevrolet Impala.
Chevrolet Impala (2006-2016 / MK 9) Today we will explain how to independently replace the rear light and the bulbs of the rear light on a 2006 Chevrolet Impala. To perform this operati…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos