Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light and bulbs of the Chevrolet Impala.

Model: Chevrolet Impala MK 9 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Today we will explain how to independently replace the rear light and the bulbs of the rear light on a 2006 Chevrolet Impala. To perform this operation, we open the trunk and remove the side clip of the panel using a spatula.

Once the cover is removed, we unscrew the inner nut and extract the light, being careful not to damage the connector. We remove the light fixture and replace the bulbs.

We insert the bulbs and reattach the light cover. We connect the connector to the light and place it back in its seat.

We secure the cover clips and close the trunk.


Posted on 9 January 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
Replacing the Headlight Bulb of the Chevrolet Impala
Replacing the Headlight Bulb of the Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) Today, we will go through the steps and instructions to remove and replace the low beam bulb of the Chevrolet Impala's headlight. First, open the hoo…
How to Replace the Battery in the Chevrolet Impala?
How to Replace the Battery in the Chevrolet Impala?
Chevrolet Impala (2014-2020 / MK 10) To replace the battery in the Chevrolet Impala, open the hood to access the components inside the engine bay: on the right side, immediately next to …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos