Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Impala
  6. : How to replace the Chevrolet Impala headlight bulb

Chevrolet Impala - Video tutorial

Model: Chevrolet Impala MK 10 - Years 2014-2020
Part: Headlight bulb
Operation: How to replace the Chevrolet Impala headlight bulb

To be able to independently replace the headlight bulb of your Chevrolet Impala (year 2014-2020) it takes just a few minutes. Thanks to the following mini guide, in fact, you will complete the entire operation without any difficulty and in total safety. First, make sure you have completely turned off the car and parked it safely. Then reach the front hood and raise it completely. At this point, unscrew the protective cap located on the internal side of the engine compartment and in correspondence with the headlight. Finally, disconnect the defective bulb and install the new one.


Posted on 4 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos