Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Matiz
    4. : How to locate the failed fuse in a Chevrolet Matiz and replace it

Chevrolet Matiz - Video tutorial

Model: Chevrolet Matiz MK 1 - Years 1998-2010
Part: Accessory Kit
Operation: How to locate the failed fuse in a Chevrolet Matiz and replace it

To make any type of replacement as regards the fuses, you will simply have to identify the fuse box itself, in fact once you reach it you will find all the fuses named to be able to distinguish them, the box in question is located under the hood, then unclip the hood with the 'special lever and then lift it to fix it with the special rod, the box is located in the upper right corner and you just need to lift the lid to be able to access the legend that is right on the inside of the lid, in this way you can replace the blown fuse by recognizing it from the legend.


Posted on 7 October 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Matiz 1998-2010 - How much does it cost to replace the LPG system on the Chevrolet Matiz? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos