Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Open the boot and remove the two screws securing the affected rear lamp. It may seem strange, but most of the work is already done.

Once you remove these screws, you can pull the lamp out of its housing. To remove any bulb from the rear lamp, slightly unscrew the connector, and the bulb will come out with it. Extract the bulb from the connector and insert the new one you purchased.

Reverse the process by placing the lamp back in position and then screwing in the two screws. Check the correct operation of the installed bulb.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Replacing Headlight Bulbs on a Chevrolet Spark
Replacing Headlight Bulbs on a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Let’s see how to remove the damaged bulbs from the front headlight of a Chevrolet Spark. Lift the front bonnet and locate the caps at the back of the…
How to replace the front headlight bulbs on the Chevrolet Spark?
How to replace the front headlight bulbs on the Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) In this tutorial, see how to replace the front headlight bulbs on the Chevrolet Spark, a very simple and quick operation. First, ensure the key is no…
Replacement of the front headlight bulb of the Chevrolet Spark
Replacement of the front headlight bulb of the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Today, we will discover how to disassemble and replace the headlight bulb of the Chevrolet Spark. First, open the hood of the car and start removing …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos