Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Headlight bulb

Today, we will discover how to disassemble and replace the headlight bulb of the Chevrolet Spark. First, open the hood of the car and start removing the plastic bulb protection cap; then disconnect the electrical connector to remove the bulb, as shown in the video. Now, install the new low beam or high beam bulb, of the correct type and with the same fitting (in this case, H13); check the light's functionality and replace the other bulb in the same way, if necessary.

Posted on 30 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on a Chevrolet Spark
Replacing Headlight Bulbs on a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Let’s see how to remove the damaged bulbs from the front headlight of a Chevrolet Spark. Lift the front bonnet and locate the caps at the back of the…
How to replace the front headlight bulb of the Chevrolet Spark
How to replace the front headlight bulb of the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Replacing the front headlight bulb of a Chevrolet Spark car independently is a simple and quick operation to follow. To perform the replacement, we n…
Replacement of the front headlight bulb of the Chevrolet Spark M400
Replacement of the front headlight bulb of the Chevrolet Spark M400
Chevrolet Spark (2016-2022 / M400) To change the front headlight bulb of the Chevrolet Spark in case it burns out, open the hood of the engine compartment and stand in front of the hea…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos