Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Chevrolet Sail?

Model: Chevrolet Sail MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel, start by taking out the screw located in the small glove compartment. Next, move to the top of the panel and pull off the rubber seal, then shift to the side and pry off the panel.

If necessary, use a flat object or a screwdriver as a lever. As you can see, the panel is quite easy to remove and does not require any special tools or skills.

To reinstall it or to put on a new one, simply follow the same procedure in reverse order.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Chevrolet Sail?
How to Replace the Cabin Air Filter in a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) As you can see in this tutorial, replacing the cabin air filter in a Chevrolet Sail is an extremely simple and quick task. First, sit in the passenge…
Location of the Fuse Box on the Chevrolet Sail or Aveo
Location of the Fuse Box on the Chevrolet Sail or Aveo
Chevrolet Sail (2010-2017 / MK 2) In this video, you will see the location of the fuse boxes for the Chevrolet Sail (the Aveo has the same fuse box location). The fuse box located in …
Where is the fuse box located in the Chevrolet Sail?
Where is the fuse box located in the Chevrolet Sail?
Chevrolet Sail (2010-2017 / MK 2) The Chevrolet Sail has one fuse box inside. The box is located within the cabin, specifically between the steering column and the driver's door at th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos