Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Sonic
    4. : Disassembly of the front bumper of the Chevrolet Sonic

Chevrolet Sonic - Video tutorial

Model: Chevrolet Sonic T300 - Years 2012-2020
Part: Front bumper
Operation: Disassembly of the front bumper of the Chevrolet Sonic

Let's see in this short guide how to remove and replace the front bumper of the Chevrolet Sonic, following the instructions below. First of all we open the bonnet and start by unscrewing the fixing screws that we find on the upper part, but also on the lower part of it; we use a 13 mm wrench. At this point we are going to unscrew the screws that we find on both sides of the front wheel arches, then releasing the bumper on the sides; then we completely remove the bumper from the body, applying the reverse procedure for reassembly!


Posted on 30 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos