Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob from a Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Shift knob

In this video, you will see how to remove the gear knob from a Chevrolet Spark: first, firmly grasp the gear gaiter from the centre console and pull it towards you to lift it over the knob. Using pliers, remove the clip that holds the gaiter to the knob, and slide it off from the top. Now, with a pair of adjustable pliers, unscrew the nut that secures the knob to the gear lever, an operation that may be more complex than expected. Once loosened, remove the knob by sliding it off from the top. Now, you need to fit the new one, which you might have found on Amazon, with code B09Y2YHVK4, priced at £36.59, with free delivery for Prime customers. Reinsert the gaiter, securing it from the inside with a tie wrap to the knob, and put everything back in place.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob on a Chevrolet Spark MK1
How to Remove the Gear Knob on a Chevrolet Spark MK1
Chevrolet Spark (2009-2016 / M300, MK 1) In this video, you will see the main steps to remove and replace the gear knob on a first series Chevrolet Spark. First, get in the vehicle and start…
Removing Gear Knob and Gaiter on Chevrolet Spark
Removing Gear Knob and Gaiter on Chevrolet Spark
Chevrolet Spark (2009-2018 / ) In this video tutorial, you will learn how to remove the gaiter and gear knob from a Chevrolet Spark. First, get inside the vehicle: detach the gear …
Removing Gear Knob from Chevrolet Spark
Removing Gear Knob from Chevrolet Spark
Chevrolet Spark (2009-2018 / ) .. Today, in this video tutorial, you will learn how to remove the gear knob from a Chevrolet Spark. First, get inside the car and detach the gear gaiter:.. …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos