Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Saxo
    4. : Spacers

Citroen Saxo - Spacers

Citroen Saxo (1996-2004 / MK 1)
Assembly of 16 mm spacers
The tools needed for this operation are: jack, Allen wrenches, sandpaper and wire brush. slightly loosen the wheel nuts before lifting it with the jack to …read all…
Posted on 24 June 2023 by ScegliAuto
Shock absorbers (2) Car stereo (2) Key (1) Air conditioning (1) -board computer (2) Checks and maintenance (3) Spacers (1) Air filter (1) Hand brake (1) Accessory Kit (1) Light bulb (1) Headlight bulb (2) Engine (6) Power Steering Motor (1) Gear oil (1) Door panel (3) Fuel pump (1) Instrument cluster (2) Fuse box (2) Lock (1) Outside rearview mirror (2) Drums and shoes (1) Windscreen wipers (1) Engine head (3) Transmission (1) Valve (1) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos