Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulbs of the interior dome light of the Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Interior dome light bulb

Today we will see the main instructions that will allow us to disassemble and replace the bulbs of the interior light fixture of the Citroen C5. First of all, we get on board the interior and start levering on the light fixture, removing it and accessing the bulb holder; inside there are three bulbs, pulling them to remove them, as shown in the video. At this point we install the new bulbs, of the right type and with the same fitting; we check their operation before reattaching the plastic cover of the light fixture, following the video tutorial until the end!

Posted on 16 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulb on a Citroën C5?
How to Replace the Number Plate Bulb on a Citroën C5?
Citroen C5 (1997-2003 / ) To replace the number plate bulb on the Citroën C5, loosen the small screws that secure the light unit in its housing directly above the number plate…
How to Change the Brake Light Bulbs on the Citroen C5
How to Change the Brake Light Bulbs on the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video tutorial, you will see how to replace the bulbs in the rear light of the Citroen C5 by following the instructions below. First, open th…
Removing Headlight Bulbs from a Citroen Berlingo
Removing Headlight Bulbs from a Citroen Berlingo
Citroen C5 (2008-2017 / MK 2, RD, X7) Learn how to remove the front headlight bulbs from a Citroen Berlingo. Lift the front bonnet to access the rear of the headlight. Remove the plastic …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos