Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Discs and Pads on a C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Brake rotors

Lift the vehicle with a jack and remove the front wheel, then take off the two bolts securing the brake caliper and unscrew the two screws that secure the disc and replace it with a new one; reposition it and secure it again with the two screws removed earlier. Remove the clips and the old pads, replacing them with new ones, and refit the brake caliper (ensuring the piston is fully retracted). Refit the brake caliper with the disc inserted between the two pads and secure it to the hub with the two supplied screws (apply a small amount of thread-locking paste to the threads). Refit the wheel and press the brake pedal to restore pressure to the braking system. Repeat the process on the other side.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Citroen C3 Picasso
How to reset the service light on the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Resetting the service light is necessary to continue driving smoothly with the vehicle, but it is important that it is done after completing all the …
How to replace the timing belt of a Citroen C3 Picasso?
How to replace the timing belt of a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Good morning, today we are going to tackle the replacement of the timing belt on our Citroen C3 Picasso. We start by opening the hood and removing th…
How to Replace the Battery on a Citroen C3 Picasso
How to Replace the Battery on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) How to replace the battery on a Citroen C3 Picasso? Let’s see how to do it. Pull up the engine compartment release lever located at the bottom left o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos