Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the manual gear lever knob on the Citroen C3?

Model: Citroen C3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Shift knob

See other generations:
Video tutorial

Here are the instructions for removing and replacing the gear knob on the Citroen C3. First, get into the vehicle and start by detaching the plastic cover on the centre console; this will remove the gaiter and the knob by pulling it upwards with force, separating the two components.

At this point, replace the gear knob, reassembling the gaiter and knob in order (securing them with a tie wrap if necessary); then, reattach the plastic cover of the centre console.


Posted on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Citroen C3
How to Replace the Gear Knob on a Citroen C3
Citroen C3 (2002-2009 / FN, FC) This guide will show you the main steps to remove and replace the gear knob on a Citroen C3. First, get inside the vehicle and start by removing the …
How to Replace the Gear Knob on a Citroen C3
How to Replace the Gear Knob on a Citroen C3
Citroen C3 (2002-2009 / FN, FC) To replace the gear knob on a Citroen C3, follow this procedure: first, detach the plastic around the gear lever, then pull upwards to reach the clip…
How to Replace the Gear Knob on a Citroen C3 Mk1
How to Replace the Gear Knob on a Citroen C3 Mk1
Citroen C3 (2002-2009 / FN, FC) In this guide, you will see how to dismantle and replace the gear knob on a first-generation Citroen C3, as well as on most models from the Citroen a…

How to reset the brake wear warning light on the Ford Transit?

To reset the brake wear warning light on the Ford Transit, first replace the worn brake pads with new replacement parts. Once the replacement is complete, disconnect the wear sensor connectors to allow them to reset. Then reconnect all the connectors to ensure they can read the new wear values. Therefore, enter the cabin and turn on the instrument panel to verify that the brake pad wear warning light has been reset.

Watch the video!


by ScegliAuto

More videos