Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Shift knob

See other generations:
Video tutorial

This guide will show you the main steps to remove and replace the gear knob on a Citroen C3. First, get inside the vehicle and start by removing the gaiter at the base of the gear lever; then disconnect the clip found between the gaiter and the knob, as shown in the video.

At this point, pull the gear knob upwards with force to detach it; then install the gaiter onto the knob and fit the knob onto the lever, securing it properly with the clip between the gaiter and the knob.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Citroen C3
How to Replace the Gear Knob on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) To replace the gear knob on a Citroen C3, follow this procedure: first, detach the plastic around the gear lever, then pull upwards to reach the clip…
How to Replace the Gear Knob on a Citroen C3 Mk1
How to Replace the Gear Knob on a Citroen C3 Mk1
Citroen C3 (2002-2009 / FC, FN) In this guide, you will see how to dismantle and replace the gear knob on a first-generation Citroen C3, as well as on most models from the Citroen a…
Removing the Gear Knob on Citroen C3
Removing the Gear Knob on Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video guide, you will see instructions on how to remove and replace the gear knob on a first-generation Citroen C3, as well as on other model…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos