Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Bulb on a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Tail light bulb

Before you can start, open the boot lid. This will expose the screws securing the light to the car. Begin by loosening and removing these screws. Once all screws are removed, proceed to disengage the light from its seat. Next, disconnect the rear bulb connector. Once you have disconnected the connector, you will be able to remove the light, gaining access to the rear cover of the bulbs. Proceed to remove this cover to access the bulbs. Once you reach the bulbs, you can extract the blown bulb. To fit the new bulb and close everything up, simply follow these steps in reverse, and you will have successfully completed the replacement.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Citroen C4 Picasso
How to replace the rear headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) If you want to replace the rear headlight bulb of your first generation Citroen C4 Picasso, but you don't know how to do it, all you have to do is re…
How to Replace the Rear Light Bulb on a Citroën C4 Picasso
How to Replace the Rear Light Bulb on a Citroën C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To replace the rear light bulb on a Citroën C4 Picasso, open the rear hatch of the car to access the screws securing the light unit in its housing. O…
How do you replace the rear headlight bulb of the Citroën C4 Picasso?
How do you replace the rear headlight bulb of the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In order to replace the rear headlight bulb of the Citroën C4 Picasso, you need to open the rear hatch so that you can access the screws that fix the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos