Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

This video tutorial explains how to replace the rear light bulb on the Citroen C4 Picasso. To replace it yourself, open the boot and unscrew the screws located on the side of the light.

After removing the screws, you can pull out the light and disconnect the connector. Open the cover of the light unit and replace the damaged bulb.

Position the light back into its housing after closing the cover, tighten the side screws, and close the boot. Finally, test the bulb's operation by turning on the vehicle's lights.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Citroen C4 Picasso
How to replace the rear headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Replacing the rear headlight bulb on the Citroen C4 Picasso requires a few more steps than normal replacement but it is still a simple task to do on …
How to replace the rear headlight bulb of the Citroen C4 Picasso
How to replace the rear headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) If you want to replace the rear headlight bulb of your first generation Citroen C4 Picasso, but you don't know how to do it, all you have to do is re…
How to Replace the Rear Light Bulb on a Citroën C4 Picasso
How to Replace the Rear Light Bulb on a Citroën C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To replace the rear light bulb on a Citroën C4 Picasso, open the rear hatch of the car to access the screws securing the light unit in its housing. O…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos