Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Tyre Pressure Light on Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part:

Before resetting, check the condition of the tyres and their pressure: if necessary, inflate them with a compressor (the required pressure data is on the label on the passenger side, accessible by opening the door). Once done, turn on the instrument panel and press the menu button below the radio. Use the arrows and the "ok" button to enter the vehicle configuration and then the parameters. Again using these buttons, go to the "driving assistance" page and reset the tyre pressure warning.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Ds3 (2010-2019 / MK 1) Resetting the tyre pressure light on a Citroen DS3 is an extremely simple and quick operation; let's see how to proceed in this tutorial. Before doin…
Citroen Ds3 (2010-2019 / MK 1) In this tutorial, you will see how to reset the tyre pressure light in the Citroen DS3, a very simple and quick operation that should only be done af…
Citroen Ds3 (2010-2019 / MK 1) This guide explains how to reset the tyre pressure warning light on a Citroen DS3 by following these simple steps. First, get in the car and turn the…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos