Do it yourself
Frequently asked questions about cars and motorcycles

Removal or Replacement of Car Radio

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Car stereo

This video shows step by step how to remove or replace the car radio. First, remove the black trim around the car radio for purely aesthetic reasons. Once removed, locate the two holes in the front panel of the radio. Use the appropriate tools and insert both ends into the holes. While pressing the tools into the holes, pull the car radio outwards. Once extracted, remove the radio antenna and connector, taking care with the wires, and finally remove the bracket where the car radio was housed.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Saxo (1996-2004 / MK 1) Remove the screws from the dashboard panel that needs to be replaced with a new one suitable for housing the new radio. Install the removable bracket…
Citroen Saxo (1996-2004 / MK 1) Each fuse in the Citroën Saxo is located inside one of the dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. Th…
Citroen Saxo (1996-2004 / MK 1) To keep your car in perfect working order, regular maintenance is essential. This includes the valve stem seals. With a bit of mechanical knowledge, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos