Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Original Car Radio

Model: Citroen Saxo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Car stereo

Video tutorial

Remove the screws from the dashboard panel that needs to be replaced with a new one suitable for housing the new radio. Install the removable bracket of the new radio and secure it by pressing the metal tabs outward.

Adjust the radio's retaining springs to perfectly align with the new fascia. Connect the extensions included in the new radio kit to the original connectors and wire the radio carefully following the instructions included in the kit. Connect all the new connectors at the back of the radio that you will place in the new housing, taking care not to pinch any wires.

Turn on the radio and check the proper functioning of all the new features offered.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Removal or Replacement of Car Radio
Removal or Replacement of Car Radio
Citroen Saxo (1996-2004 / MK 1) This video shows step by step how to remove or replace the car radio. First, remove the black trim around the car radio for purely aesthetic reasons.…
How to Replace and Adjust the Rear Brake Pads on the Citroen Saxo
How to Replace and Adjust the Rear Brake Pads on the Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) Today's step-by-step instructions will show you how to remove and replace the rear brake shoes on the Citroen Saxo. First, lift the vehicle and remov…
Where are the fuses located in the Citroën Saxo?
Where are the fuses located in the Citroën Saxo?
Citroen Saxo (1996-2004 / MK 1) Each fuse in the Citroën Saxo is located inside one of the dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. Th…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos