Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Resetting the tire pressure warning light on Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SX, SY - Years 2016-2023
Part: Tires
Operation: Resetting the tire pressure warning light on Citroen C3

Hello everyone! When the tire pressure light on Citroen C3 comes on, first check the condition and pressure of the tires with a special pressure gauge and, if necessary, inflate with a compressor. Once you have done this and made sure of their condition, you can proceed with the reset. Get in your car and turn on the ignition but not the engine. Using the buttons on the central dashboard, enter "configuration" and then "vehicle parameters". Now enter "comfort" and "tire inflation" and reset this section. This is a very simple operation.


Posted on 10 May 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2016-2023 - What to do if the tire pressure light comes on on Citroen C3? Read Answer
    • C3 2016-2023 - Tire warning light on Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos