Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the dashboard of the Citroen C3?

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Dashboard

The example shown in the uploaded video tutorial demonstrates the disassembly of the dashboard following an accident involving a 2019 Citroen C3. This or other reasons may necessitate performing this type of work, which includes the following steps: we start by removing the steering wheel by releasing the clips through the rear side holes, then we move on to the instrument cluster, the trim panels of the dashboard, beneath which we find the fastening screws, the glove compartment, the controls installed on the dashboard, climate controls, etc., as well as the car radio, and finally, we disconnect all electrical connections.

Posted on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Freshener from a Citroen C3
How to Remove the Air Freshener from a Citroen C3
Citroen C3 (2009-2016 / SC) How to remove the air freshener from a Citroen C3? The air freshener is original and not added later to the dashboard. Let's see how to remove it fro…
How to Reset the Service Light on the Citroën C3?
How to Reset the Service Light on the Citroën C3?
Citroen C3 (2016-2023 / SY, SX) To reset the Service light on the Citroën C3, press and hold the button located at the bottom of the instrument panel on the left. While holding it d…
How to Reset the Service Light on a Citroen C3
How to Reset the Service Light on a Citroen C3
Citroen C3 (2009-2016 / SC) To reset the service light on a Citroen C3, follow these simple steps divided into 4 phases: - close all doors; - press the button located on the rig…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos