Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How do you replace the injector seal on your Citroën C3?

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Injectors
Operation: How do you replace the injector seal on your Citroën C3?

In order to replace the injector seal on the Citroën C3, you need to open the bonnet, so that you can access the components inside the engine compartment: the plastic cover will be present in the upper part of the engine block which must be removed in order to access the injectors and the relative fuel transport pipes. Once these have been disconnected, it will be possible to extract the injectors by removing the underlying gaskets: in this way it will be possible to insert the new gaskets, reposition the injectors and connect them again.


Posted on 8 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos