Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the windshield seal of the Citroen C3 Pluriel

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

See other generations:
Video tutorial

In this guide we will see the main instructions that will allow us to disassemble and replace the windshield seal of the Citroen C3 Pluriel. First of all, we get on board the car and start lowering the soft top, thus accessing all the seals (both of the roof and of the windshield); we then remove the seal present on the sides, removing any glue underneath with specific products, as shown in the video.

At this point, we can proceed with the installation of the windshield seal, making sure to fix it correctly.


Posted on 19 August 2025 by ScegliAuto


Related tutorials

How to Remove and Install the Roof of the Citroen C3 Pluriel Spyder
How to Remove and Install the Roof of the Citroen C3 Pluriel Spyder
Citroen C3 (2003-2010 / Pluriel) In this guide, you will find the main instructions on how to remove and install the roof of the Citroen C3 Pluriel Spyder. First, open the rear hatch…
What is the Fuse Diagram for the Citroen C3 Pluriel?
What is the Fuse Diagram for the Citroen C3 Pluriel?
Citroen C3 (2002-2009 / FC, FN) In this video, you can see where the fuse boxes are located in the Citroen C3 Pluriel and their respective diagrams, to consult in case you need to c…
How do you open the roof of the Citroën C3 Pluriel?
How do you open the roof of the Citroën C3 Pluriel?
Citroen C3 (2002-2009 / FC, FN) In order to open the convertible top of the Citroën C3 Pluriel, you need to turn on the instrument panel by inserting the ignition key into the corre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos