Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the Roof of the Citroen C3 Pluriel Spyder

Model: Citroen C3 Pluriel - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Convertible top

See other generations:
Video tutorial

In this guide, you will find the main instructions on how to remove and install the roof of the Citroen C3 Pluriel Spyder. First, open the rear hatch of the boot and begin removing the roof elements if it is to be installed; then secure the pillars to the frame, subsequently installing the roof onto the guides to slide it into the correct closed position, as shown in the video.

For removing the roof, simply lower it and then detach and remove the side pillars, repositioning all elements in the rear compartment.


Posted on 6 June 2026 by ScegliAuto


Related tutorials

How do you repair the convertible top of the Citroën C3 Pluriel?
How do you repair the convertible top of the Citroën C3 Pluriel?
Citroen C3 (2002-2009 / FC, FN) In order to repair the Citroën C3 Pluriel convertible top, you need to use a tool to pry off the coverings of the sliding tracks located on the sides…
How do you open the roof of the Citroën C3 Pluriel?
How do you open the roof of the Citroën C3 Pluriel?
Citroen C3 (2002-2009 / FC, FN) In order to open the convertible top of the Citroën C3 Pluriel, you need to turn on the instrument panel by inserting the ignition key into the corre…
Guide to replacing the windshield seal of the Citroen C3 Pluriel
Guide to replacing the windshield seal of the Citroen C3 Pluriel
Citroen C3 (2002-2009 / FC, FN) In this guide we will see the main instructions that will allow us to disassemble and replace the windshield seal of the Citroen C3 Pluriel. First of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos