Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

First, engage the handbrake after turning off your vehicle. Now, unclip and lift the bonnet to disconnect the battery cables, protecting the remaining electronic components.

Next, locate the bulb to be replaced and remove the rear cover of the headlamp to access it. After disconnecting the connectors at the back of the bulb, carefully insert the new bulb without touching it with your fingers, ensuring it is the right way round.

Retrace your steps for reassembly.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Citroen C3
How to Replace the Headlight Bulb on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) The steps shown in this guide will allow you to remove and replace the dipped beam bulb of the front headlamp on a Citroen C3. First, open the bonnet…
Replacing the Dipped Beam Bulb in a Citroen C3 SX
Replacing the Dipped Beam Bulb in a Citroen C3 SX
Citroen C3 (2016-2023 / SY, SX) In this video, see how to replace the dipped beam bulb in a Citroen C3 that has blown. Open the bonnet of the engine compartment, position yourself i…
How to Replace the Left Front Headlight Bulb on the 2012 Citroen C3
How to Replace the Left Front Headlight Bulb on the 2012 Citroen C3
Citroen C3 (2009-2016 / SC) Replacing the left front dipped beam bulb on the Citroen C3 is a very simple task to perform independently. To carry out the replacement, you need to…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos