Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Replacement of the dipped headlamp bulb of the Citroen C3 SX.

Citroen C3 - Video tutorial

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Headlight bulb
Operation: Replacement of the dipped headlamp bulb of the Citroen C3 SX.

In this video, we see how to proceed to replace the low beam headlight bulb of the Citroen C3 that has burned out. We open the hood of the engine compartment, stand in front of the headlight containing the bulb to be replaced and, working on the back of the headlight, remove the rubber cap protecting the bulb, disconnect the electrical connector, and remove the old bulb. We insert a new H7 bulb in its place, making sure to securely fit it into its housing and being careful not to touch the glass part with bare fingers, reconnect the connector, and put the rubber protection back in place.


Posted on 15 May 2024 by ScegliAuto



How to replace the headlight bulb on a Citroen C3?
Citroen C3 (2002-2009 / FN, FC) Before starting, we will have to open the front hood of our Citroen C3. So let's start by unhooking the clip that fixes the rear cover of the burned
Replacement of the front headlight bulb of the Citroen C3.
Citroen C3 (2016-2023 / SY, SX) Today's instructions will show us how to disassemble and replace the front headlight bulb of the Citroen C3, following these simple steps. First, we
Citroen C3 license plate bulb replacement
Citroen C3 (2002-2009 / FN, FC) In this video tutorial we will see how to remove and replace the license plate bulb of a Citroen C3 first series, in simple steps. First we open the

Other guides that may interest you

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos