Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C3
  6. : Replacement of the front headlight bulbs of the Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SX, SY - Years 2016-2023
Part: Headlight bulb
Operation: Replacement of the front headlight bulbs of the Citroen C3

Today's guide will show us how to disassemble and replace the headlights bulbs, as well as the low beam, position, and turn signal bulbs, of the Citroen C3. First, we open the car's engine hood and start by removing the plastic protective cap of the bulbs. Then, we disconnect the bulb holders along with the bulbs, removing the low beam, position, and turn signal bulbs in the same way as shown in the video. At this point, we install the new lights, which have the same connection, and finally reassemble the plastic cap!


Posted on 6 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos