Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Cupra Born key

Model: Cupra Born MK 1 - Years 2021-2026
Part: Key

Replacing the key battery of a Cupra Born is a very simple operation, which can be done independently thanks to our short video tutorial. The first thing to do is to extract the emergency key, to do this you just need to press the side button. Once the key is removed, we need to insert a flat tip screwdriver on the right side and remove the remote control cover, in order to access the battery. Remove the battery by pushing upwards and insert a new battery, CR2032. Finally, close the cover and insert the metal key inside the remote control.

Posted on 7 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Cupra Born (2021-2026 / MK 1) The fuses of the Cupra Born are located inside the appropriate fuse boxes: in this type of car it will be possible to identify two boxes for containi…
Cupra Born (2021-2026 / MK 1) On board the Cupra Born, the fuses are located inside one of the specific fuse boxes that are installed on the vehicle: in this type of vehicle it wi…

Other guides you may be interested in

How to Remove the Door Panel on a Renault Megane

How do you remove the door panel on a Renault Megane? Follow these steps for disassembly. Before starting, disconnect the battery terminals located in the boot. Use a lever to remove the plastic cover of the release handle, then remove the handle cover on the panel. Using a screwdriver, unscrew the securing screws located in the plastic handle. Once all screws are removed, use the lever to detach the window switch panel, the speaker, and all the plastic clips securing the door. Pull the door panel away by hand, disconnect any power connectors and release cable.

Watch the video!


by ScegliAuto

More videos