Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to remove the door panel of a Renault Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane 1 - Years 1995-2003
Part: Door panel
Operation: How to remove the door panel of a Renault Megane

How do we remove the door panel of a Renault Megane? Let's see how to proceed with the disassembly. Before starting the disassembly work, let's disconnect the battery terminals in the luggage compartment. We remove with a lever the plastic of the opening lever, then, we remove the cover of the handle on the panel. With a screwdriver we go to unscrew the tightening screws placed in the plastic handle. Once all the screws have been removed, with the lever we detach the window control panel, the speaker and all the plastic clips that block the door. We detach the door panel by hand, unhook any power supply terminals and release cable.


Posted on 3 November 2023 by ScegliAuto



How to remove the door panel of a Renault Megane?
Renault Megane (1995-2003 / Megane 1) So let's start by going to open the front door of our Renault Megane. Once this is done, we will have to proceed by removing the internal opening han
How to remove the door panel of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How to remove the door panel (passenger side) of a Renault Megane? This video explains how to proceed. Before starting the disassembly work, let's di
Disassembly of the door panel of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Let's see briefly the disassembly and replacement of the front door panel of the Renault Megane, following these simple steps. First of all, we open

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos