Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Programming the Window Regulator System

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Window switch

See other generations:
Video tutorial

Programming the automatic opening and closing function of the window regulator is a manual operation (no diagnostic programming is required). Once the window is fully closed, hold the button in the closed position for three seconds: this will program the function, and at the first touch of the button (without holding it down), the window will open completely to the end of its travel (pressing the button during the descent allows you to stop it at the desired position).

Similarly, pressing the button once in the closing direction will cause the window to close automatically to the end of its travel (again, you can stop it at the desired position by pressing the button again).


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Replace Window Switches on a Megane
How to Replace Window Switches on a Megane
Renault Megane (2002-2010 / Megane 2) Removing the faulty switch panel from a Renault Megane? Start by prising it off from above the door panel. Use a plastic or metal lever to pry betwee…
Renault Megane Fuse Diagram
Renault Megane Fuse Diagram
Renault Megane (2002-2010 / Megane 2) This model of car from the French manufacturer has two fuse boxes. The first is located in the passenger compartment, at the bottom of the dashboard …
How to Reset and Calibrate the Side Window Operation on the Renault Megane
How to Reset and Calibrate the Side Window Operation on the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide provides instructions to reset and recalibrate the window lift system on the Renault Megane, as well as the Scenic and Laguna. First, get …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos