Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the key battery for a Cupra Formentor.

Model: Cupra Formentor MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

In today's video, we will see the entire operation necessary to replace the battery (CR2032) of a Cupra Formentor key, a model produced from the year 2020 onwards. This operation is very simple and can be done completely independently in just a few seconds, but let's see how to proceed.

Let's start the replacement procedure by taking a small lever, such as a small flathead screwdriver or a small blade, to remove the back cover of the key as shown in the video. Once that is done, we can take out the old battery from the key and then replace it by inserting a new one. Finally, we close everything back up.


Posted on 27 November 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Cupra Formentor key
How to replace the battery of the Cupra Formentor key
Cupra Formentor (2020-2026 / MK 1) In this new guide dedicated to all of you who own a Cupra Formentor, we will discover the correct procedure for replacing the small button battery lo…
How to Change the Key Battery of a Cupra Formentor
How to Change the Key Battery of a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Let's see how to replace the key battery of a Cupra Formentor. To do this, buy a CR2032 battery, which can be easily found in any electronics store o…
How to Replace the Key Battery of a Cupra Formentor
How to Replace the Key Battery of a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Replacing the battery of the remote for the Cupra Formentor is very simple. This operation is performed in a few steps and will take only a few minut…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos