Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the remote battery of the Cupra Formentor

Model: Cupra Formentor MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

In this article, you will learn how to replace the battery of the Cupra Formentor remote. For this operation, you will need a flat screwdriver.

First, pry open the unlock button of the emergency key located at the bottom of the remote, remove the emergency key by pulling it outwards. After removing the emergency key, use the screwdriver to pry along the edges of the plastic cover where the logo is located.

Once the edge is lifted, pry to remove the cover. At this point, use the screwdriver to remove the battery, then replace the battery.

Finally, close the remote by pressing down with your hands to reinsert the remote cover, and then reinsert the emergency key into its designated slot.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

How to replace the remote control battery in the Cupra Formentor?
How to replace the remote control battery in the Cupra Formentor?
Cupra Formentor In this tutorial, you can see how to replace the battery in the remote control of the Cupra Formentor, a very simple and quick operation. To do this,…
How to Change the Key Remote Battery on a Cupra Formentor
How to Change the Key Remote Battery on a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) To replace the battery in the key remote for a Cupra Formentor, press the unlock button to extract the emergency mechanical key from the remote. Then…
How to Replace the Key Fob Battery of a Cupra Formentor
How to Replace the Key Fob Battery of a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) In this tutorial, observe how to replace the battery of the key fob for a Cupra Formentor. The operation is extremely simple; you will only need a sm…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos