Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Remote Battery on a Cupra Formentor

Model: Cupra Formentor MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

To replace the battery in the key remote for a Cupra Formentor, press the unlock button to extract the emergency mechanical key from the remote. Then, use the same key or a small plastic tool to pry in the groove of the casing and gently separate the two halves of the remote.

Once opened, locate the button battery and remove it, taking care of the polarity position. Insert a new battery of the same type, ensuring the correct orientation.

Close the remote securely until the clips snap into place and reinsert the mechanical key into its slot. Finally, check that the unlock and lock buttons function correctly.


Posted on 25 May 2026 by ScegliAuto


Related tutorials

How to replace the remote control battery in the Cupra Formentor?
How to replace the remote control battery in the Cupra Formentor?
Cupra Formentor In this tutorial, you can see how to replace the battery in the remote control of the Cupra Formentor, a very simple and quick operation. To do this,…
How to Replace the Key Battery of a Cupra Formentor
How to Replace the Key Battery of a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Replacing the battery of the remote for the Cupra Formentor is very simple. This operation is performed in a few steps and will take only a few minut…
How to change the remote battery of the Cupra Formentor
How to change the remote battery of the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) In this article, you will learn how to replace the battery of the Cupra Formentor remote. For this operation, you will need a flat screwdriver. First…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos