Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Cupra Formentor

Model: Cupra Formentor MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

In this tutorial, observe how to replace the battery of the key fob for a Cupra Formentor. The operation is extremely simple; you will only need a small flat-head screwdriver.

Take the key fob of your car and insert the tip of the screwdriver at the side edge of the casing corresponding to the vehicle's logo. At this point, lever it outwards to open it and proceed to extract the old battery using the same method by prying with the screwdriver tip on the edge of the battery.

Finally, insert the new battery and close the casing.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Change the Key Battery of a Cupra Formentor
How to Change the Key Battery of a Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Let's see how to replace the key battery of a Cupra Formentor. To do this, buy a CR2032 battery, which can be easily found in any electronics store o…
How to Replace the Key Battery on the Cupra Formentor
How to Replace the Key Battery on the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) In this guide aimed at all Cupra Formentor owners, we will discover the steps you need to take to replace the key battery correctly and safely. First…
How to replace the remote control battery in the Cupra Formentor?
How to replace the remote control battery in the Cupra Formentor?
Cupra Formentor In this tutorial, you can see how to replace the battery in the remote control of the Cupra Formentor, a very simple and quick operation. To do this,…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos