Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : How to replace the headlight bulb on a Dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Headlight bulb
Operation: How to replace the headlight bulb on a Dacia Logan

It often happens that a headlight bulb strikes, but there is no need to worry because with a little foresight you can change it yourself, specifically today we would go to see how to replace the headlight bulb on our Dacia Logan. First let's get a light bulb that is suitable for our car. After opening the bonnet we go to remove the cover of the lamp holder (just pull there is no hook), now we can extract the lamp holder but first make sure to release the catch that holds the lamp holder still, now that we have pulled it out let's remove the old bulb and insert the new one, insert the lamp holder and block it with the latch, now we can insert the cover and we would have finished.


Posted on 10 November 2023 by ScegliAuto



How to replace the headlight bulb on the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In order to replace the headlight bulb on the Dacia Logan, you need to open the hood to access the engine compartment and locate the circular cover o
How to replace the headlight bulb on Dacia Logan
Dacia Logan (2004-2012 / MK 1) We can see in this short video tutorial how to replace the low beam bulb of the headlight on a first generation Dacia Logan, model produced from 2004
Dacia Logan headlight bulb replacement 1
Dacia Logan (2004-2012 / MK 1) Today we will see the procedure necessary to remove and replace the headlight bulb of the dacia Logan first series. First of all we open the bonnet a

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos