|
Do it yourself
| |||
| ||||
How to disassemble the front headlight of the Dacia Logan
Model: Dacia Logan
MK 1
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
The following steps will show us how to disassemble and replace the front headlight of the Dacia Logan. First, we open the vehicle's hood and start removing the plastic partition located above the front bumper grille, unscrewing the fastening screws; then we unscrew the screws located inside the wheel arch, then unscrew all the screws of the headlight assembly, as shown in the video. At this point, we disconnect the electrical connector of the headlight to remove it, replacing the bulbs or the entire headlight assembly; then we reassemble and connect the front headlight!
Posted on 27 February 2025 by ScegliAuto
Related tutorials
Dacia Logan
(2004-2012 /
MK 1)
Here's how to replace the front light bulbs on a Dacia Logan. Lift the front bonnet. Using a screwdriver, remove the plastic cover that conceals the …
Dacia Logan
(2004-2012 /
MK 1)
Are the front headlight bulbs blown? Let’s see how to replace them on a Dacia Logan. Open the front bonnet by pulling the lever located at the bottom…
Dacia Logan
(2012-2022 /
MK 2)
To replace the front headlamp bulb on your Dacia Logan yourself, simply read the following guide and follow the described procedure. First, lift the …
Other guides you may be interested in
|
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |